Measurement Products - Thickness Gauges
X-ray Thickness Gauges
Isotope Thickness Gauges
A standard workhorse in the aluminum industry. Measures from 0.004 to 0.08 inches / 0.1 to 2 mm of aluminum thickness.
More signal, lower noise, and faster measurement than the STB1. Measures from 0.004 to 0.08 inches / 0.1 to 2 mm of aluminum thickness.
A solid, uncomplicated, and long-lasting gauge for steel and aluminum measurement. Measures steel from 0.005 to 0.250 inches / 0.1 to 6.3 mm.
Measures aluminum from 0.06 to 2.5 inches / 1.5 to 10 mm.
Measures aluminum from 0.06 to 2.5 inches / 1.5 to 10 mm.
The same robust, simple gauge as the STG1, but with much more signal, lower noise, and faster measurement time constant.
Measures steel from 0.005 to 0.250 inches / 0.1 to 6.3 mm.
Measures aluminum from 0.06 to 2.5 inches / 1.5 to 10 mm.
Measures steel from 0.005 to 0.250 inches / 0.1 to 6.3 mm.
Measures aluminum from 0.06 to 2.5 inches / 1.5 to 10 mm.
Commonly used for canstock, finstock, and light gauge breakdown passes, this is a very high-speed low-noise X-ray gauge for aluminum thickness at 0.002 to 0.080 inches / 0.05 to 2.1 mm.
Commonly used for a variety of aluminum products and breakdown passes, this is a very high-speed low-noise X-ray gauge for aluminum thickness at 0.010 to 0.400 inches / 0.25 to 10 mm.
This is a very high-speed low-noise X-ray gauge that can be tuned for a wide range of steel and stainless steel thickness measurement from 0.002 to 0.300 inches / 0.05 to 7.6 mm.
Used primarily for plate mill and hot mill applications, this X-ray gauge can be tuned for multiple thickness ranges. For aluminum, it can be tuned to measure up to 7.5 inches / 200mm.
For steel, it will measure up to 0.75 inches / 20mm.
For steel, it will measure up to 0.75 inches / 20mm.
The STXR-10 is the newest member of the SenTek X-ray sensor family. It is a compact, air-cooled miniature X-ray source and detector that can be tuned to wide range of aluminum sheet as well as steel, stainless, brass, and copper foils.